Propane firepit installation: a complete guide to cylinder sizing for your BTU or kW output

Installing a propane firepit requires some calculations depending on the burner output.  We have created a guide to make sure you don’t waste your time or money by using the incorrect size cylinder for your firepit’s BTU or kW output.

To start, here is a conversion list for BTUs (for North America) to kWs (for the UK and EU) to keep everything consistent: (note kWs are rounded up)

50k BTUs – 15 kW

80K BTUs – 24 kW

108k BTUs – 31 kW (high output burner)

Next, we need to know how many Kg/h each size of propane cylinder gives out, this is shown in Table 4.3:

Table 4.4 shows the Kg/h required for the kW rating (output) of the burner:

Using a 31 kW rating as an example, one 31 kW burner requires 2.263 kg/h of propane vapour.

In table 4.3, we can see that a 19 kg cylinder gives off 1.344 Kg/h

We then simply divide the desired heat input of the burner in Kg/h by the cylinder size in Kg/h. So, 2.263 ÷ 1.344 = 1.684

Rounding this number up, approximately 1.7, 19 kg tanks are needed for a 31 kW burner firepit. Therefore, you will need two cylinders to power your firepit.

Why using propane vapour input just won’t work:

Using the same example as above, one 19 Kg cylinder can only deliver 18.8 kW. So, If you hook up a 19 Kg cylinder to a 31 kW burner, it’ll work for some time but that depends on the ambient temperature. However, the cylinder will  ice up, starting from the base and rising to the top on the outside. Then, the cylinder will shut itself down to prevent liquid from being pulled out (an inbuilt safety feature). Following this, it will remain locked out until all the ice has dissipated, which might take a couple of hours.

In conclusion, to save yourself the hassle, take 5 minutes with these quick and easy instructions to make sure your propane firepit runs smoothly! If you’re still having trouble however, Solus is always happy to help either via email or phone, which you can find on our website!